ISP Technologies

VECTOR 212 Extension

ISP Technologies Vector 212 is an active two channel guitar amplification system with a 100 watt guitar amplifier channel delivering power to a G12T-75 Celestion guitar speaker and a second channel delivering 300 watts RMS to an internal tuned 12 inch subwoofer.

By adding the active 400-watt VECTOR 212 extension cabinet you literally double the available power of the THETA Combo system to 800 watts RMS. The VECTOR 212 connects to the extension output of the THETA combo and includes the same 12-inch Celestion guitar speaker and 12 inch high excursion woofer for that incredible deep low-end.

Buy Online


Description If you are using a guitar preamp or processor like the POD you can add the Vector 212 to your current guitar system to deliver the power amplifier, guitar speaker and subwoofer for a stunning huge sound. Add two for a stereo rig and be prepared to enter a whole new world of sound for the guitarist.

The Vector 212 accepts line level input signals from your THETA or other guitar processor and splits the signal into two bands. The mids and high frequencies are separated with a high slope high-pass filter, amplified by an internal 100 watt patented D-CAT power amplifier and then fed to drive a Celestion G12T-75 guitar speaker. The low frequencies and filtered with a high slope low-pass filter and then internally amplified with a 300 watt RMS patented D-CAT power amplifier channel to drive the dedicated Neo subwoofer speaker.

The system delivers a new level of performance for the guitarist by combining the great guitar tone of a Celestion guitar speaker with an internal subwoofer offering the most incredible full range guitar sound you’ve ever heard. You can add additional cabinets to your system if you need even more stage SPL but be warned, this system hits hard.

Made with Baltic Birch

Features Vector 212 Active Extension Cabinet designed for the Theta Combo Amp for twice the output.

Specs- 12 inch celestion (100 watts)
– 12 inch large excursion neo woofer (300 watts)
– Response to 40Hz (-10dB)
– Weight – 65 lbs.
– Dimensions – 30″ W x 20″ H x 14″ D

Share this with a friend...Share on FacebookTweet about this on TwitterPin on PinterestEmail this to someone