Tired of the limited performance of 4×10 bass cabinets? ISP Technologies has taken a different approach to the modern bass guitar system. Combining the low frequency extension that only an 18” driver can achieve with the natural, extended (but not brittle) highs of dual 8” drivers, the Bass Vector cabinet achieves a balance of depth, impact, and definition that makes 4×10’s sound lifeless in comparison! At low frequencies, a single Bass Vector exceeds the output of a typical 4×10 cabinet by 4 dB or more at 40 Hz.
The ISP Beta Bass Preamplifier is the ideal ‘head’ for the system, or the active cabinet can be used with other bass heads when driven from their line output, and the passive cabinet can be driven from virtually any powered bass head.
The high performance 18” driver is complemented by an advanced cabinet design featuring optimum volume and a large, deep tuned port. This helps to minimize the non-linear behavior and reduced low frequency output that small ports produce. The cabinet is tour grade, with Baltic Birch plywood construction, dadoed joints, extremely durable rubberized polyurethane finish, metal handles, and casters.
Made with Baltic Birch
– High performance bass guitar cabinet with one 18-inch woofer and dual 8” midrange drivers in line array topology
– Exceeds the performance of typical 4×10 cabinets by 4 dB or more at 40 Hz at high volumes.
– 1000 Wrms D-CAT amplifier built in (active version)
HF Drivers: 2 x 8 inch, high sensitivity, 250 watt rms total.
Sensitivity: 98 dB @ 100 Hz, 102 dB @ 1KHz (1 Watt at 1 meter).
SPL: 126 dB at 1 meter, long term.
130 dB at 1 meter, peak.
Frequency Range: 29 Hz to 5 KHz (-10 dB).
Freq. Response: 39 Hz to 4 KHz (+- 3 dB).
Amplifier Power: 1000 W rms, high current DCAT, fan cooled.
Power Required: 5 Amps x 120 VAC typical, 10 Amps max.
Construction: Baltic Birch Plywood, extensively braced.
Finish: Rubberized Polyurethane.
Dimensions: 30” W x 21.25” H x 24” D (without casters).
Weight: Active – 125 Lbs, Passive – 110 Lbs