ISP TECHNOLOGIES

ISP Technologies

BASS VECTOR 115

ISP Technologies presents its newest edition to the rapidly growing Bass Vector family. Now you can get the same great Bass Vector performance, in a smaller and more compact package! Combining the low frequency extension that only an 15” driver can achieve with the natural, extended (but not brittle) highs of dual 8” drivers, the Bass Vector 115 cabinet achieves a balance of depth, impact, and definition that makes 4×10’s sound lifeless in comparison!

Buy Online

 

DescriptionAvailable in active and passive versions, a single active cabinet delivers 600 watts to its speakers. When an additional passive cabinet is connected, the amplifier delivers a total of 1000 watt RMS to the two cabinets. The total system power can be further increased by adding additional active and passive cabinets. There is a limit of 1 passive cabinet per active cabinet.

The ISP Beta Bass Preamplifier is the ideal ‘head’ for the system, or the active cabinet can be used with other bass heads when driven from their line output, and the passive cabinet can be driven from virtually any powered bass head.

The high performance 15” driver is complemented by an advanced cabinet design featuring optimum volume and a large, deep tuned port. This helps to minimize the non-linear behavior and reduced low frequency output that small ports produce. The cabinet is tour grade, with Baltic Birch plywood construction, dadoed joints, extremely durable rubberized polyurethane finish, metal handle, and casters.

Made with Baltic Birch

Features 15 inch woofer and dual 8 inch midranges. 600 watt rms. Line array topology for stacking with great horizontal dispersion. Passive version available.
– High performance bass guitar cabinet with one 15-inch woofer and dual 8” midrange drivers in line array topology
– Smaller and lighter-weight than the 18″ version, but still the same great tone and quality.
– 1000 Wrms D-CAT amplifier built in (active version).

SpecsLF Driver: 1 x 15 inch, large excursion, 450 watt rms.
HF Drivers: 2 x 8 inch, high sensitivity, 250 watt rms.
Sensitivity: 98 dB @ 100 Hz, 102 dB @ 1KHz (1 Watt at 1 meter).
SPL: 125 dB at 1 meter, long term.
129 dB at 1 meter, peak.
Frequency Range: 35 Hz to 5 KHz (-10 dB).
Freq. Response: 45 Hz to 4 KHz (+- 3 dB).
Amplifier Power: 1000 W rms, high current DCAT, fan cooled.
Power Required: 5 Amps x 120 VAC typical, 10 Amps max.
Construction: Baltic Birch Plywood, extensively braced.
Finish: Rubberized Polyurethane.
Dimensions: 30” W x 19” H x 19” D (without casters).
Weight: Active: 104 Lbs., Passive: 89 Lbs.

Share this with a friend...Share on FacebookTweet about this on TwitterPin on PinterestEmail this to someone